Scope of application: * mould release agent * paint additive * lubricant or as lubricant additive
Description:
1. Product Characteristics
This product is specially modified polysiloxane with long chain alkyl and aryl groups. It is used as demoulding agent for aluminium die casting with high requirements for temperature resistance and sprayability.
1) It is used for spraying die and has excellent heat resistance.
2) It has excellent sprayability.
3) Good compatibility with coatings.
2, Usage
Mold release agent;
Coating additives;
Lubricants or as lubricant additives.
3. Usage Methods
After emulsifying the product, it can be used as a demoulding agent for the mould.
As an additive and lubricant for coatings, it can be used directly or diluted by organic solvents. When actually adding, please pay attention to adjusting the amount of adding properly.
When used as TPE additive, it can be mixed with white mineral oil with a dosage of 1-2%.
4. Safety and Health Attention
The recorded products are industrial products. If there are special requirements for medical treatment, food, cosmetics and so on, please make appropriate tests beforehand and use them on the basis of confirming safety.
Before using this product, please test it beforehand in order to confirm whether it is suitable for use. In addition, the use described here is not guaranteed to conflict with any patent.
Because organosilicon may deteriorate in hot, light, acid and alkali environment, please keep it sealed in a cool place.
Packaging: 180kg/barrel or IBC drums, non-dangerous goods, transported by ordinary goods.
