In August, long Huixiang actively expanded the scale, and the monthly production capacity of vulcanizing agent was increased to 100 tons! In September, longhuixiang continued to make efforts. In order to better and faster serve customers, longhuixiang Technology (Jiangmen) Co., Ltd., a subsidiary of Shenzhen longhuixiang Technology Co., Ltd., was established in Jiangmen. It mainly produces and sells organic silicon auxiliary materials, double 25 vulcanizing agent, platinum vulcanizing agent, color paste, color masterbatch, mold washing agent, release agent, etc. at the same time, the company sells acid, alkali, alcohol and other related chemical materials.


Longhuixiang Technology (Jiangmen) Co., Ltd. takes the development of new materials, the production of new products and the materials with special requirements of customers as the core, and it is its own responsibility to meet the special requirements of customers. The company has its own development team and laboratory, advanced production equipment such as high-speed disperser, filter, internal mixer, sulfurizer and open mixer, and computer vulcanizer, oven and other precision testing instruments, Ensure that high-quality products are delivered to customers. The company's professional technicians can help you solve the technical problems of new product development and silicone rubber products. With the development needs of the international market, all our products meet the EU environmental ROHS standards, and some products can meet the FDA and lfgb standards. Strive to create: innovation, energy conservation, environmental protection, food, hospital level materials!


one


Silica gel paste


picture


application area


It is used for coloring liquid silica gel such as LSR liquid silica gel, RTV silica gel and silicone resin.


physical property


Appearance: viscous liquid of different colors


Specific gravity: 1.2-1.5


Pigment concentration: 20% - 50%


Addition ratio: 1% - 4%


two


Silica gel color masterbatch


picture


application area


It is used for coloring solid silica gel such as calendered silica gel, molded silica gel and extruded silica gel.


physical property


Appearance: color blocks of different colors


Solid density: 1.2g/cm ³- 1.5g/cm ³


Hardness: 30a-40a


Pigment concentration: 20% - 50%


Addition ratio: 0.1% - 2%


three


Vulcanizing agent series


picture


picture


picture


picture


C-14 odorless anti yellowing curing agent


For the production of silicone rubber pacifier, pressure cooker sealing ring, tableware knife and fork, cake plate, water dispenser elbow, etc., it meets the standards of human contact and dietary hygiene. One time molding is completely tasteless, the molding temperature is 150 ℃ - 180 ℃, and the product does not turn yellow after vulcanization.


C-15a high anti yellowing curing agent


The utility model relates to a bridge building agent in the form of wet powder, which is used for molding and vulcanization of silicone rubber products, and can keep the products from yellowing during secondary vulcanization. One time molding is completely tasteless, the molding temperature is 150 ℃ - 180 ℃, and the product does not turn yellow after vulcanization.


C-20 anti yellowing curing agent


The utility model relates to a bridging agent for translucent viscous paste, which is used for molding and vulcanization of silicone rubber products, and can keep the products from yellowing during secondary vulcanization. Moderate molding temperature, good vulcanization activity, good compatibility, no yellowing after vulcanization, and basically tasteless after vulcanization.


C-60 odorless rapid curing agent


The utility model relates to a paste bridging agent, which is used for molding and vulcanization of silicone rubber products. Fast vulcanization speed, low addition ratio, good compatibility and low odor after vulcanization molding.


Lh-33 0 flavor curing agent


For the production of silicone rubber pacifier, pressure cooker sealing ring, tableware knife and fork, cake plate, water dispenser elbow, sex products, watch strap, medical products, etc. The primary film pressing molding is completely tasteless, reaching the zero flavor standard, the molding temperature is 150 ℃ - 180 ℃, the environmental protection level is high, the product does not turn yellow after vulcanization, and the secondary vulcanization process is reduced.


Special recommendation: lh-55 one component platinum curing agent


Lh-55 is a one component addition bridging agent, which has the characteristics of convenient addition, low vulcanization temperature and fast vulcanization speed. It is mainly used in the production of silicone rubber. Compared with peroxide, it has the advantages of high hygiene group, high efficiency and tasteless, and gradually replaces the traditional oxide vulcanization agent.


Bis (2,4) - low temperature vulcanizing agent


This product is a white paste with molecular weight of 380.4, theoretical active oxygen content of 4.21%, activation energy of 28.1kcal/moi, decomposition temperature of 112 ℃ (half-life of 1 minute); 54 ℃ (half-life 10 hours)


Lh-31a / b platinum sulfide


Medical food grade, the vulcanization speed is 20-30% higher than that of ordinary vulcanizing agent, the vulcanization temperature is low, it can be formed at 120-150 degrees and stored for 15 days after feeding, and has good yellow resistance.


four


Lh-680 back glue


picture


This product is used as a fast adhesive for silicone double-sided adhesive. The tensile stripping is 1-1.2kg per square centimeter. It has been tested by ROHS environmental protection and designated by TCL Digital Business Division.


five


Release agent


picture


C-10 internal release agent


This product is an effective internal release agent added to silica gel products in the process of die hydraulic molding. Its release effect is excellent. It is widely used in the manufacturing of silica gel conductive rubber and miscellaneous parts.


Me-333 release agent


Fluorine release agent has excellent release property for release agent of silicone rubber, especially for silicone rubber and fluororubber. Compared with other release agents, the release effect of this product is much higher. After three years of actual test, it will never affect the printability of the surface.


This product will form a release film on the mold surface, which has obvious rapid release effect, and the release is lasting, which can greatly improve the production efficiency and excellent printing performance, and will not produce printing defects due to too much spraying.


six


Lh-518 Ximo Bao


picture


It can quickly remove the residue, release agent and other dirt during silicone rubber molding. After cleaning, it will not damage the mold surface, has low use cost, convenient operation, strong cleaning force, 1:2-3 dilution ratio, quickly remove all dirt residues on the mold surface, and has been tested by ROHS environmental protection.